8 Port RJ45 With 1 Port SFP Din Rail Vlan QoS STP/RSTP For Outdoor Use
Introduction of Managed Industrial Gigabit Fiber Switch
IM-FS180GW Managed Industrial Ethernet Switch is the 10/100/1000 Mbps industrial fiber switch, operating temperature -40 ℃ to + 75 ℃, support wide voltage dual power input, support web management, meet IP40 protection degree and EMC industrial grade requirements, DIN rail installation, pass through dangerous environmental certification and comply with FCC and CE standards. The reliable industrial grade design could ensure continuous and stable operation of the automation system.
Key Features of Managed Industrial Gigabit Fiber Switch
-
8 x 10/100/1000Mbps Auto-sensing TX RJ45 ports
-
1 x 1000Mbps SFP fiber port
-
Support cable diagnosis and can locate the fault point
-
Support IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimize power consumption
-
Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
-
Support Qos, transport classification Qos, Cos, bandwidth control (input/output direction), storm suppression ,differentiated services
-
Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN, Protocol VLAN,VLAN convert, MVR
-
Support dynamic IEEE802.3ad LACP link aggregation, static link aggregation
-
Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching
-
Support IGMP agent report, MLD snooping
-
Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+,HTTP/HTTPS, SSL/SSH v2
-
Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
-
Support software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade failing
-
Support DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
-
Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP
-
Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,TFTP, QoS, ACL.
Spectification of Managed Industrial Gigabit Fiber Switch
| Product Name | 10/100/1000Mbps Managed Industrial Fiber Switch(1F+8TP) |
| Model No. | IM-FS180GW |
| Port | 1 x 1000Mpbs SFP port SM:1310nm/1550nm,20Km ;1490nm/1550nm, 40~120Km; MM:1310nm, 2Km; 8x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Standard | IEEE 802.3, IEEE802.3U, IEEE802.3ab, IEEE802.3z, IEEE802.1d STP, IEEE802.1w RSTP, IEEE802.1s MSTP, ITU-T G.8023 EPR/Y.1344, IEEE802.1Q, IEEE802.1X, IEEE802.3ad, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.1ad, IEEE802.1p, IEEE802.1ab, IEEE802.3az |
| VLAND ID | 4096 |
| Jumbo Frame | 9.6KB |
| MAC Address Table Size | 8K |
| Switching features | Transmission mode:storage and forward System bandwidth:40Gbps (non-traffic jam) DRAM size: 128M
Flash size: 16M
Packet buffer size: 4Mb |
| Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) SFP port,transmission distance: 20Km,40Km,60Km,80Km,100Km |
| LEDs | Power, network, fiber |
| Power supply | Input voltage:DC 12-52V; No-load power:5W; Reverse connection: support |
| Environment | Working Temp:-40°～ 75°C ; Storage Temp:-40°～ 85°C;Working humidity:10%～90%, non-condensing; Storage humidity:10%～95%, non-condensing |
| Industry Standards | EMI:FCC Part 15 Subpart B Class A,EN 55022 Class A EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3, EN 61000-4-8; Traffic Control:NEMA-TS2; Vibration:IEC 60068-2-6; Freefall:IEC 60068-2-32; Shock:IEC 60068-2-27; Rail Traffic:EN 50121-4 |
| Safety | CE Mark ,commercial ; CE/LVD EN60950 |
| Mechanical information | Shell:Corrugated metal shell; Safety class:IP40; Dimension:158 x 114.8 x 60mm; Mounting method:Din-rail mounting |
| Warranty | 3 years |
Application of Managed Industrial Gigabit Fiber Switch
Q&A of Managed Industrial Gigabit Fiber Switch
Q: Does this industrial Gigabit fiber L2 managed switch include the power supply?
A: No, it doesn't include a power adapter.
Q: Which power adapter does this industrial Gigabit Fiber L2 managed switch require?
A: The input voltage is 12-52VDC. The power adapter can be 12VDC 3A.
Q: Is it a managed switch?
A: Yes, this is an L2-managed 9 port outdoor Ethernet fiber switch.
Q: What managed function does it support?
A: The 9 port managed switch is L2+ managed, and it supports STP, RSTP, MSTP, EPR, Qos, IEEE802.1q VLAN, MVR, IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching, ports aggregation, etc.
Q: What temperature range can this switch reach?
A: The operating temperature is -40～75℃
Q: Does it come with a small din rail?
A: This is a din rail switch, but the din rail is not included.
Product Tags:
|
|
Outdoor Din Rail Managed Industrial Gigabit Switch IP40 With 1 SFP Port Images
|
